How to hide wires from a computer under a table: how to hide wires from a computer under a table

Slitting process

Why bother with “disguising” the electrical wiring if you can first attach it to the main wall, and then simply plaster it on top.
The technique is called “hidden” and the sequence of actions is not always exactly the same. Most often, a team of plasterers does their job valiantly, and then they are replaced by electricians who begin to reformat the world in their own way, in accordance with the tasks assigned to them. This is strongly reminiscent of the joke about two soldiers from a construction battalion, one of whom was digging holes, and the other was burying them after him (there was no third one, who was supposed to plant trees, but an order is an order). To carry out wiring, electricians are forced to make channels for wires and holes in the plaster with a hammer drill - to punch the surface. Not everyone and not always want this burdensome procedure:

Scoring damages existing plaster. It is extremely rare to be able to break through neat channels. And even if this can be done, the final layer of plaster in the areas of gating will still have to be restored after laying the cable. It is worth recognizing that the technique is very multi-iterative.
Grooving is associated with increased generation of dust, which will be everywhere in the apartment. If we are not talking about the initial arrangement, but about repairs, then you will definitely have to re-glue the wallpaper and update the ceiling.
Long-term unpleasant sound impact of a hammer drill. Even if you carry out repair work at strictly prescribed hours by law, your neighbors will still not thank you.
The wiring turns out to be completely hidden. There will never be access to it now.

The purpose of the thesis of this section is not at all to discredit one of the most universal construction technologies that provides great opportunities (slating)

In relation to electrical wiring, I would like to emphasize that the design and aesthetic appeal of the method comes at the price of safety. Electricity is not something to joke about, and communications tend to fall into disrepair. It would be good to replace them

But if the wires in the apartment are laid in channels drilled into the wall, then you can simply forget about it. Replacing the wiring is only possible by laying a new cable and disconnecting the old one (from both ends)

It would be good to replace them. But if the wires in the apartment are laid in channels drilled into the wall, then you can simply forget about it. Replacing the wiring is only possible by laying a new cable and disconnecting the old one (at both ends).

In this regard, it would be nice, of course, to get an alternative. There is such a way - it is laying electrical cables in an open way. The features and capabilities of this path are described below.

Cable channels, their types for masking wires

The plastic channels into which the cord is inserted and inserted are called cable channels. This is one of the most convenient options for hiding electrical wires, used after completion of finishing work. They are often used in the kitchen - this is convenient when renovations are done, but later additional equipment such as an air conditioner, washing machine, and lighting are purchased.

Cable channels vary in color, they are easy to replace and add new branches. The design is made of fireproof materials, the cords in it are maximally protected from external damage and ultraviolet radiation. The downside here is that choosing colors to match some interior styles (baroque, ecological, empire, rustic, etc.) is problematic, although the design looks much better than wires hanging from everywhere. When the cable channel is located on a corner or any protrusion, it is easy to catch.

The element is made of plastic, metal (galvanized steel, anodized aluminum), it can be U-shaped, W-shaped, triangular, semicircular. Fastening to the wall or floor is done with self-tapping screws, dowel-nails, iron brackets, and anchors. There are also flexible rubber, wire, and transparent options.

Useful tips

In order not to get confused when masking the wires and not to get into trouble during repairs, they must be marked in advance. This will help you immediately find the right cable later. It is better to separate low-power wiring from power wiring, without connecting it into a single bundle. Wires from the antenna and the Internet should be placed separately from others so as not to spoil the signal quality.

Cables should have the shortest possible length and the minimum number of connections: this increases their safety and reduces the risk of injury. It happens that the braid of hidden cables frays due to poor placement, so in dangerous places the wiring must be checked more often. If you need to mask wiring, you can use any ideas, especially since the range of tools and materials for decoration is now huge!

Organize your cable storage

Organizing them correctly will help you get rid of tangled wires. First, collect cords from phones, players, game consoles, and tablets throughout the house. Then take boxes (preferably prettier ones), place cardboard dividers inside them, label the location for each cable (so you don’t get confused later) and lay everything out neatly. To prevent the wires themselves from getting tangled, use regular cable ties.

If you don't want to deal with boxes, buy a basket and save up more toilet paper rolls.

onecrazyhouse.com

If the wires don't bother you, you can simply attach a label to each one to make it easier to distinguish between them. For example, like this:

thescoopnewspaper.com

Hide wires from TV

With a TV the situation is a little more complicated, because in this case the wires are always visible. But, here are the following solutions to this situation.

First way

To hide the wires from the TV on the wall, just use the “Cable Box”, in the photo you will find an idea of what it is.

This is the final result.

Second way

Suitable for people who do not want to make repairs. This way you can get a chic design, and the wires in this case will only highlight your interior. The method is chic, however, not everyone likes it.

As you can see, hiding wires on the wall is incredibly easy.

Third option

It is suitable only in cases where repairs are just beginning. After all, all the wires can simply be hidden behind the wall. It looks like this:

If necessary, you can stretch another wire, or get an existing one.

Fourth option

The most popular one is to hide the wires under the baseboard. In order not to be verbose, I found this video for you.

https://youtube.com/watch?v=FaTMwyWp4fA

In this way you can hide wires from: air conditioning, home theater, music center. Although it is better to hide the wire from the air conditioner in a cable channel, because running it under the baseboard is not a good idea; it will have to be removed sooner or later.

Popular options for hiding wiring in an apartment

You can hide wires and cables from view using improvised means that are found in almost every apartment. Stores also sell special devices and solutions to this problem.

In decorative boxes

There are special decorative skirting boards that differ in their special design and performance characteristics. They have a cable channel in which the cords are located. The materials from which skirting boards are made can be different:

Plastic - located at the base of the floor, there are special separating cells on the profile rail, thanks to which several types of wires are laid.
The tree is quite rare. As a rule, wooden boxes are made to order. Their insulation class must be appropriate to avoid fire during use.
Aluminum is most preferred. It is highly resistant to fire and accommodates a large number of powerful wires.

Hide the junction box

According to the rules, the junction box cannot be hidden under finishing materials. Access to it must always be free for maintenance and repair. Therefore, the white lid can be painted to match the color of the walls or covered with wallpaper. So that the plug does not stand out from the overall interior, it is also painted with automotive enamel to match the tone of sockets and switches.

Where to hide under the floor or near the baseboard

Wires lying around on the floor can be hidden under the floor. But this is done during repairs, because lifting floorboards or covering elements separately is a labor-intensive process.

Many people prefer the finish in its original form.

Wiring is often hidden in a special panel; it is mounted on the wall along the baseboard and is not noticeable.

In addition, it can be decorated or painted.

If masking occurs during repairs, then a hole is made in the floor using a hammer drill, then the wire is inserted into the corrugation and laid in the hole made. After which the floor is filled with cement.

How to remove wires from a TV, tuner

In many cases, the TV is mounted on the wall. A decorative box will help hide trailing wires from a TV or tuner. Construction stores offer a wide range of different models of cable channels that will match the color and design of any interior.

If the TV is located on a stand or table, then you can nail the cords with a construction stapler to the legs or back wall of the piece of furniture. It is better to install the socket behind the TV, or vice versa. As a last resort, cut a groove in the wall behind the TV and run electrical wiring along it. Then fill the groove with plaster and finish it.

Where to put the wires on the floor

Cords lying on the floor are not only unsightly, but also unsafe. Boxes are convenient for hiding extension cords to which many devices are connected. For example, under the desktop, where a desktop computer and its peripherals are located. A regular shoe box will do for this. You need to make several holes in it for the wires and place an extension cord there. If desired, the box can be decorated with decorative elements or covered with paper.

For these purposes, there are ready-made solutions - boxes made of durable plastic, the bottom of which is rubberized for stability on the floor. On the top cover there are holes for cords, and inside there are fasteners, and a long wire is wound around them. It can be placed on the floor or mounted on the wall.

Hiding with furniture

Another way to hide wires is to use furniture, both regular and special. For example, the wire from the computer can be secured under the tabletop using double-sided tape (not very secure, but easy to change position), a construction stapler or self-tapping screws. In the latter case, it is better not to drill the table itself, but to use a metal mesh or perforated screen, and then attach the wires to it with zip ties or ordinary office binders.

Use wire mesh to avoid drilling into the back of the table

The surge protector can be easily hidden in the same way by screwing it under the table or securing it to the back surface of the workplace. The wires that will go to it should be secured with thick tape or using plastic ties.

When there are few wires, you can get by with one such hole.

If the TV is on a cabinet and not hanging on the wall, then the wires can be easily hidden behind the furniture, and the accompanying equipment (for example, a TV set-top box) can be placed inside it.

Drill a hole in the TV stand to hide the wires from the router, set-top box and other peripherals

If you are just planning to buy furniture, then pay attention to tables with niches, plugs, shelves and drawers designed specifically for pulling wires. As a rule, such solutions are found in tables and cabinets designed for offices. . A plug on the table will solve the problem with wires

A plug on the table will solve the problem with wires

You can also consider a completely hidden computer installation - buy or make a table with a closed compartment for the system unit, keyboard and other peripherals.

Another option to hide wires using furniture

How to hide and decorate wires at a computer desk: design ideas

The problem of tangled wires has been known for a long time. To facilitate the task of smoothly integrating them into the interior of the house, kits and accessories developed by designers from all over the world will help. New items appear often, so you can buy them for yourself or make an original gift. We invite you to take a closer look at some of the proposed inventions.

The designers have already worked hard and come up with a set of Wire Blooms for decorating wires and cables in the house. In the set you will find a red bird made of plastic and green leaves made of the same material. In a few minutes your wires will turn into a blooming garden with singing birds. Lots of wires - there will be a whole green forest. By the way, you can group many of the ideas proposed above into one composition. For example, lay out a tree on the wall with wires, and use these clips to secure and decorate the same cords at the same time. We also mentioned above that even using scrap materials you can repeat a design solution. True, it will be very difficult to cut out such a beautiful bird.

A real trunk with leaves called Florafil - another modern development. In cases where it was not possible to hide the wires, this solution will help to correctly fit them into the interior, turning them into a bright decoration on the wall.

The idea is similar to the previous version. But it looks much brighter and more modern. The only thing missing is a bird. But you can “seat” colorful animals on such branches at your own discretion, or even make them yourself with your children.

Cable Caps - This device looks like hooks for children's clothes. But their purpose is different; they are fasteners for USB cables. By threading the wires through these hooks, you will avoid tangling. This gadget looks very colorful and funny.

But that's not all. Creative developers have thought through everything to the smallest detail. By looking at the “face” of the hook, you will immediately understand which device the wire comes from. And this will not only help remove the coil of cords from under your feet, but also sort them according to the necessary criteria.

CableDrop are practical adhesive holders. These holders look like colored round hooks. They are attached using adhesive material. But their advantage is that when peeled off, the sticky mass does not spoil the wallpaper or harm the furniture.

Such simple colored fasteners have long won many fans.

No matter how hard you try, you won’t be able to hide all the wires, much less extension cords. Designers offer an original solution to this problem - a WirePod extender. Looks like a pattern in an abstract style. It complements the design no worse than other decorative elements, and you definitely won’t want to hide it.
“Wire and Cable Trap” is a ring with notches of different sizes and diameters. Suitable for different types of wires. Easily mounted on a desktop. The table material can be different - both wood and plastic. The device will collect chargers and computer cables in one place. But be prepared to drill a hole in the table.
Donut- shaped extension cord This spherical device will allow you to wrap the wire along its axis, and a special recess is designed for this. This way you can adjust the cable length yourself. And the gadget looks interesting and fits easily into the interior.
A new product from a Korean designer deserves attention - Takayaki . Essentially, this is an extension cord, but, like any Asian product, it acts as a high-tech gadget. Functionality is not compromised, and its appearance looks very impressive. The rosettes are shaped like balls, painted with Chinese patterns. But that is not all. Such balls are illuminated at night with multi-colored lights and look unusual in the dark. If you look into it in detail, the gadget will surprise even a seasoned connoisseur. These balls can move apart into two hemispheres. This is done so that you can wind a long wire and avoid cable tangles.
And if you completely remove the top part, you get an additional charger for numerous devices that allow wireless charging. The extension cord can serve as a stylish night light, as an additional and pleasant bonus.

Computers, televisions, tablets, phones and other modern technology have long been part of our lives. This entire “arsenal” is connected using wires. If you show your imagination and spend a little time, these cables will become not only a functional device, but also a complete addition to the interior. Just buy or make the necessary devices. But if you think globally, it is better to immediately hide the wires in the wall or under the baseboard during repairs.

Camouflage covers

You can make your own cover for one or several cords at the same time from plastic bags cut into long, narrow strips. A kind of “sleeve” is knitted or crocheted from them, into which all the necessary wiring is inserted. To hide an extension cord with charges in this way, a handbag of suitable size is knitted or sewn.

Some stores offer decorative collapsible plastic covers in the form of tree branches, colored tubes, and shiny snakes. This design does not have the protective properties of cable ducts, but it is acceptable to cover “ugly” wires with it. If desired, a special spiral braid can be purchased - it is flexible, has an aesthetic appearance, and allows you to hide both one element and many wires.

What you need to know when working with TV cables

First of all, you need to remember the safety requirements for electrical installation and pay attention to the following aspects:

all work must be carried out with the equipment turned off;
use tools only with insulated handles;
monitor the integrity of the cable insulating coating;
do not allow wires to rub against sharp edges of furniture;
exclude exposure of the cable sheath to high temperatures;
avoid tangling of wires, their kinks and crushing by heavy objects;
prevent moisture and condensation from entering the cable channels;
The TV cable should not intersect with power lines.

You can decorate the wires with a decorative box. What conclusion can be drawn from all this - for a person with hands and imagination, nothing is impossible, and there is no limit to perfection. The main thing is to carefully plan everything, stock up on the necessary tools, materials and get to work.

Don't forget to follow safety standards.

Installation of the junction box

There are some nuances here too. It’s worth starting with the fact that in rooms with concrete walls it is recommended to use diamond-coated drill bits, since the more common models with pobedit coating wear out quickly, and you will have to buy additional drills. They can only be used in houses with walls made of finblocks. Typically, when working with finblocks, it is prohibited to use diamond-coated crowns for the same reasons.

Before milling begins, a hole with a diameter equal to the drill is made in the center of the installation, which will make the work much less difficult. Experts recommend choosing boxes with a diameter of 6-7 cm; this will be quite enough for 6 cores. If you plan to connect several sockets in a row, the place for them is leveled.

Wiring diagram

Safe wiring cannot be achieved without prior planning in the form of a work plan.

For home use, you can get by with a handwritten plan on paper. It is enough to measure the required distances with a tape measure and put them on the drawing. But to increase reliability, knowledge of electrical circuits and experience as an electrician will be required.

If you do not have the required knowledge, you can always use the services of specialists. Most often they use Elektrik 7.8 software. It greatly simplifies wiring design. There is no charge for using the program. The specialist will quickly build and calculate complex circuits thanks to a well-thought-out algorithm. Visio is also used to design the lighting circuit.

After drawing up the project, the locations of sockets and switches are marked on the walls. It is worth considering the feasibility of such a location. In practice, you often have to give up some connection points.

How to secure wires near a desktop

If the table is installed against a wall, you can cover the hanging wires with a beautiful curtain, panel, or secure them with decorative hammocks. For an extension cord that is constantly getting in the way on the floor, a small box is suitable; it will also protect it from dust. Be sure to make several holes in it to bring the cable out.

If you are a device lover, an interesting idea for grouping wires is to install a decorative stand in the form of an electrical tower on the work surface. You can also put an unusual box on the table with holes for the output of wires, which can be easily connected to the equipment at any time. It won’t take up much space, but at the same time, it will hide the clutter and allow you to conveniently organize chargers for gadgets and headphone cables.

The need for masking wires

Why is it necessary to hide electrical wires, why should they not be within reach:

this is ugly - the tangle of heaps of cords in the most prominent places greatly spoils the appearance of the room, violating the integrity of most interiors, especially “historical” ones. The only exceptions are spaces decorated in the style of techno, industrial, loft, art-believe;
this is unsafe - it’s easy to get caught on a cable stretched across the entire room, fall, and get injured. Teething children, many pets, are capable of chewing electrical wires out of curiosity, which often leads to electric shock of varying severity.

Is there a mess under the desk in the office? There is a solution!

Is there a mess under the desk in the office? There is a solution! You just need to call me and I'll fix everything.

Are you tired of wires that keep everyone tripping? Something always doesn't work because someone accidentally pulled it out. And the worst thing is that this horror has already lasted, as clients told me, for 3 years.

It's time to stop this, all you need to do is call the master, that is, here is the number for me

+79221642071 Nikolay

Okay, anyway, do you have a few questions, how to hide wires under the table? Yes, everything is very simple, you just need to stock up on electrical tape, plastic ties (clamps), if you have a hammer in the house or something heavy and hard, even a stone, then you can also buy small clips with nails.

And on a creative journey, my only advice is to turn off your computer or whatever you have or ask to save more often. Otherwise, when untangling the wires, you will have to disconnect something.

Here in the photo, of course, there is a more complex process of hiding the wires in an aluminum threshold, but take note.

This is what the wires look like for every personal computer user

And like this, after my arrival.

Well, I’ll tell you how to do it, everything is simple, first of all, start from the top of the whole process, from the monitor and using electrical tape or zip ties, just start collecting everything in a bun.

Just leave a spare wire under the mouse and keyboard for a moment, otherwise you won’t be able to move it or move it later. And just like that, we slowly go down to the bottom to the system unit, here I also nailed the wires to the table with brackets, they are available in any hardware store.

If you have any extra length of wire left, fold it into a bundle and wrap or tie it into your existing braid. And here in the photo it turned out absolutely gorgeous, I secured the surge protector using self-tapping screws to the table, and tied the wires in a way we already know. In my opinion, I hid these wires from the computer well, I really like it myself, and most importantly, nothing dangles under my feet and does not collect dust and food debris.

Well, I think I clearly explained to you what exactly needs to be done with the wires under the table? And even more so, the price of such a question is a penny. Here's what the things you'll need look like.

Insulating tape

Plastic ties or clamps

Cable clips on tape, you don’t even need a hammer or a screwdriver, just glued it in and stuck the wire in, an excellent option, just wipe the dust off the table, otherwise everything will fall off in half a year.

The clips for the wires with the nail will definitely not fall off.

Well, that's all, good luck to you in your creative tidying up under the table.

If you don’t want to buy or do anything, just call me in Yekaterinburg.

+79221642071 Nikolay

Useful tips for masking wires for TV and other equipment

Before hiding the wires from your computer, TV, phones and other equipment in one place, you should mark the cable products on both sides, which will make it easier to find the right element in the future. To prevent the cords from intertwining, it is recommended to use special ties.

Signal cables and data wiring must be laid at some distance from AC power supplies. This solution will minimize interference during the operation of equipment, which can manifest itself in data failure, noise in the speakers, and poor image

It is important to remember that the length of the video and audio cable is of great importance. The smaller it is, the lower the risk of interference, signal loss and other negative factors.

An excellent solution for hiding wires would be to use furniture that has special niches for this.

Important! The longer the audio/video cable, the better its quality should be. The length of the optical cable does not matter much

Its quality is important here. It must have sufficient flexibility without being brittle. The computer cable is laid with some extra length. The power cable must be laid with optimal tension, excluding places where the cable sag. It is necessary to ensure that the wires do not bend, as this can damage the internal braid of the cable.

The length of the optical cable does not matter much

Its quality is important here. It must have sufficient flexibility without being brittle

The computer cable is laid with some extra length. The power cable must be laid with optimal tension, excluding places where the cable sag. Care must be taken not to bend the wires, as this can damage the internal cable braid.

When masking cable products openly, you need to protect the wires from fluorescent lighting. You should not use elements with an outer shell in the form of a fabric braid, which will quickly lose its neat and aesthetic appearance. In addition, such a braid, if damaged, can cause the cable to ignite.

The article discussed various methods of masking wires. Some of them are quite simple to implement, while others require a more serious approach and large-scale implementation. Internal camouflage is advisable at the stage of repair work. In case of laying cable products in a decorated room, external wiring should be used. For this purpose, in construction stores there are many devices for effective and original masking of household appliance cords.

External camouflage

If the methods discussed above are not available for implementation, do not despair. To beautifully and wisely hide numerous cords, you can use the opposite method, which involves external camouflage. If you approach the issue wisely, numerous wires will in no way spoil the interior, but, on the contrary, will give it exclusivity and an unusual appearance.

Let's look at how to hide the wires outside. The options are as follows:

Imitate a tree branch. You can easily decorate a computer or television cable by using it to create a small branch decorated with homemade flowers, leaves or birds. This solution will transform the interior, giving it uniqueness and brightness.
Make a tree. If the wire is one and a half meters long or more, there is no need to cut it - it will turn into a nice “tree”. To fix the cord, special fasteners are used, with the help of which the necessary outlines are set.
Power station. Fans of original design can imitate the supports on which the wires will be attached. This method allows you to solve two problems - make the wires invisible to the eye and create a basis for teaching your children.
Complex drawings. If you have free time and imagination, you can hide the wires on the wall by creating an original landscape. Here the main emphasis is on the contrast between the shade of the wallpaper (paint) and the cable. Separately, it is worth considering elements that allow you to highlight the wiring.
Fence. One of the best options is to mount the wires at the top of the baseboard. But to hide them from view, you should make wooden blanks shaped like a fence, and then secure them with double-sided tape. This method is suitable for a corridor or a child’s bedroom. For greater originality, each element of the “fence” can be painted in a different color.
Car track. This option is the most labor-intensive, because its implementation requires time. To create a road, cardboard is used, from which the required object is cut out. Next, the paper is painted in a color that matches the interior.
Other methods. In addition to the options listed above, wires can be hidden under door frames, behind indoor plants, under the carpet or behind furniture.

Remember that it is better to develop a plan for masking wires in advance, and then strictly adhere to it.

Lots of creative ways to hide wires are shown in this video:

Popular options for hiding wiring in an apartment

You can hide wires and cables from view using improvised means that are found in almost every apartment. Stores also sell special devices and solutions to this problem.

In decorative boxes

Plastic - located at the base of the floor, there are special separating cells on the profile rail, thanks to which several types of wires are laid.
The tree is quite rare. As a rule, wooden boxes are made to order. Their insulation class must be appropriate to avoid fire during use.
Aluminum is most preferred. It is highly resistant to fire and accommodates a large number of powerful wires.

Hide the junction box

When working with a distributor, it is important to observe technical safety so as not to cause a short circuit or electric shock.

Where to hide under the floor or near the baseboard

Wires lying around on the floor can be hidden under the floor. But this is done during repairs, because lifting floorboards or covering elements separately is a labor-intensive process.

Many people prefer the finish in its original form.

Wiring is often hidden in a special panel; it is mounted on the wall along the baseboard and is not noticeable.

In addition, it can be decorated or painted.

How to remove wires from a TV, tuner

Where to put the wires on the floor

Wi-Fi Almighty, or how to cover all devices with the Internet

Of course, you already have a Wi-Fi router. But whether you use it to its full potential is a question.

Use a Wi-Fi adapter

How many times have I seen this picture: I have a laptop, but the Internet works via cable. The reasons are different: some cannot find the drivers, others have a problem with the hardware. But everything can be resolved. Drivers can be selected by any computer technician with straight hands, and a burnt-out Wi-Fi module can be replaced with an external USB adapter.

A regular system unit can also be connected via Wi-Fi. To do this, you will need the same USB adapter or PCI card with external antennas.

Cover all corners

The signal from the router may go out due to improper location, microwave ovens, reinforced concrete structures and other obstacles

Therefore, please take into account the following:

place the router in the center of the apartment (office);
place the router at a distance of at least 1 m from the floor;
do not place near a microwave oven;
If your gadgets support Wi-Fi 11ac standard, use a dual-band router. It will help avoid interference when working in overloaded airwaves. This is true for apartment buildings, where almost every family has Wi-Fi.
if the router's power is not enough, use Wi-Fi repeaters to distribute the signal evenly throughout the room.

What to consider when choosing a camouflage method

When choosing a decoration method, take into account:

Length and number of cables. Plastic boxes work well for single lines. If you need to lay several lines, it is better to use corrugated pipes hidden behind the finishing or suspended ceiling. Regardless of the masking method, it is prohibited to stretch the wires due to the risk of destruction of the cores and insulation.
Cable connection method. If installed incorrectly, the plug or socket may be damaged. It is necessary to provide a margin of length, since mechanical impact on the tensioned line can destroy the protective layer or metal conductors. If damage is detected on the insulation during installation, it is necessary to wrap the surface with PVC tape or install a piece of shrink tube. If there are large cracks, it is recommended to cut out a piece of the cable or lay a new line.
Installation location. It is not recommended to place wires behind radiators of the central heating system and stoves, since heating leads to the gradual destruction of the cable insulation.

Hiding wires in the wall

Laying the wire in the groove
First, using a wall chaser, after removing the remaining plaster and concrete, you need to cut a groove in the wall in which all the wires will be hidden. The wiring must be placed in a protective sheath - corrugation, which serves to protect against external adverse influences. Then the wires should be laid in the cut channels, after which the wall must be plastered.

To hide the wires in the wall, you have to break its integrity, and you often don’t want to do this, since this will damage the interior, in addition, the work is associated with dust and debris, and subsequently the wall must be reconstructed, which involves certain costs. Therefore, you can use other, more profitable methods, in which you do not need to resort to chipping the wall.

Wire on the wall

Mounted on the wall

If you have artistic taste, you can fix the wire on the wall and make a picture out of it. It is quite clear that a native, one and a half meter wire will not be enough for these purposes. Choose a suitable design and transfer its outlines to the wall, making a light-colored drawing with a simple pencil. Now you need to calculate the required amount of wire. To do this, you can attach a nylon thread to the wall so that it repeats the pattern. Then its distance can be measured. Don’t forget to add the length from the drawing to the outlet and to the source of electricity consumption - add a meter in reserve and you will get the required amount.

Wire manufacturers most often do not offer an abundance of wire colors, so you have to choose from what is available - black or white. If these colors do not suit you, then you can buy an extension cord, which can be pink or red. Don’t rush to rely on your opinion - try attaching a strip of colored fabric to the wall and you will immediately see whether the chosen color is suitable and will harmonize with the overall decor.

Decorated wire is not noticeable

If you decide to do everything simply but tastefully, then you can attach the decor to the wire or come up with your own, something original.

Alternative Methods

Wires covered with cloth

You can find a different approach - to mask the wires rather than hide them, and existing elements of the room will help in this, for example, door frames, baseboards, ceiling moldings, as well as heating risers. With the right approach to work, the laying of wires can be made almost invisible, which will have a beneficial effect on the interior of the room. Typically, low-current wires (Internet and telephone) do not cause any difficulties in laying; they can be hidden in baseboards, under metal thresholds or in platbands. When laying the power cable, a different approach is needed.

Often, all electrical communications in our time are laid using a hidden method, but due to various circumstances this installation option is impossible, for example, when, during repairs, it becomes necessary to install additional sockets or switches.

Hiding the wire in the cable channel

Cable channel
Almost always in the house there is a section of wiring that needs to be trenched into the wall or closed using a cable channel, which is a plastic box - it will protect the electrical wires from mechanical damage. The box has an attractive appearance and in this case it can be used as a decorative element. This option is also a solution to fire safety problems.

Laying the wire in the bathroom can be especially difficult when the walls and floor of the room are completely tiled. If there is a suspended ceiling in the bathroom, the wires can be hidden in it, and if this is not possible, then a cable channel will help in this situation.

Why hide computer wires: basic safety rules

The wires and cables that are used to connect computers are not simple. They serve not only to transmit electrical energy, but also to send data and signals. If you look at a computer cable from the inside, you can see that it consists of one or more colored pairs of wires that are intertwined with each other. This is not without reason, because such a scheme improves reception and, of course, signal transmission.

The following types of computer wires are known:

wires that do not have a common shield are called UTP;
wires with a screen made of aluminum foil - FTP;
wires, the common screen of which is made of copper mesh, but a separate pair has its own additional screen, are called STP;
wires whose overall shield consists of a foil mesh, and each individual pair has its own additional shield, are called SSTP or S/FTP;
then the wires that do not have a common screen, but each individual pair has a foil screen, are called U/STP;
and the list is completed by an improved model of wires that consists of two screens. One is made of foil, and the second is made of copper mesh. They are called SF/UTP or simply SFTP.

Important: Although it is worth noting that all categories of computer wires stand out among other relatives by their higher resistance to changes in temperature, current and various loads, including voltage failures. But make sure you have a proper outlet and carry, preferably one with a fuse.

Simple rules for storing computer wires

Do not forget that a computer cannot work without wires. The laptop will, of course, last for a while, but without a charging cord it won’t last long. You need to treat cables with care and know the basic rules for storing them.

You need to put special silicone pads on the coils of wires. There are colors for every taste, so it will be easy for you to choose one that matches your interior or just the one you like.
Do not twist the wires at random, they may break and deteriorate. The same applies to the traditional winding of wires into a skein.
Keep unnecessary wires out of sight. Put away any unnecessary cables that you are not currently using. Chargers, extension cords and adapters must have their own place for storage!
Do not forget about the simple rules for operating wires and cables, regardless of their type and even the outer sheath. Unplug them from the outlet and replace cables that have damaged insulation inside or outside. Otherwise, you and your family risk getting an electric shock if you come into contact with such a wire.
If the wire is exposed, the risk of water getting inside increases. The result is a short circuit and fires in the house. Do not allow liquid to come into contact with the wires. By the way, you should not place water near computer equipment. It is better to drink tea, coffee and other drinks in the kitchen.
Pet rodents can get electrocuted and die. Why, overly inquisitive children can get hurt!
A large accumulation of wires can not only cause injuries and falls, but even more serious consequences.
Do not overload the carriers and take into account their possible transfer! This will protect the devices themselves, in particular the computer, from breakdowns.
Do not forget to periodically clean sockets, carriers and wires with the equipment itself from dust . In general, dust is the worst enemy of all electrical partings. And together with foreign objects, for example, threads, feathers or other household debris, they can cause a fire in the house.

This is a nice way to hide the wires

Hide a cable channel or decorative box in a cable

Using a product like this is a simple and inexpensive method to hide the wiring from the TV. You can find plastic, metal and combination types on the market. This way to hide wiring is not only stylish, but also safe. The boxes comply with fire regulations.

The main thing is to choose the right size of the material, taking into account all the cables that need to be placed in it, and also calculate the length to the outlet. This material is produced in pieces 2 m long, which must be connected with special elements (connectors, plugs, tees, corners in different directions when turning, etc.). The color of the box is selected in accordance with the wall cladding.

Decorative boxes can turn cable networks from your TV into a piece of themed wall decor.

Lined with brick, they are suitable for decorating a room in a modern style.
For loft, products in the form of pipes of small diameter are used.
Those who prefer eco-style should take a closer look at wood-look options.

In addition, such an element can be easily painted to match the color of the wallpaper or decorated with wooden boards that imitate the texture and shade of wall cladding.

Cable laying rules and sequence of actions

The coaxial wire combines two functions - transmitting a signal from the receiver to the display device and protecting it from external electromagnetic radiation. To ensure the best quality signal, the antenna cable must be installed correctly to maintain these characteristics.

First of all, you need to draw up a small length diagram with a minimum number of adapters and joints. Already at this stage it is necessary to provide a method of masking, since not only the design, but also the necessary strength of the protective coating depends on this. In a private house, part of the conductor may be located on the street

Therefore, when choosing a suitable model, you should pay special attention to its density and the presence of a moisture-proof layer

Coaxial cable installation in branched systems is carried out using plugs, adders, splitters, sockets, etc. The more there are, the stronger the signal attenuation will be. To eliminate this problem, you need to choose only high-quality products.

After planning the passage of the television cable in an apartment or private house, all the necessary equipment is purchased. Then they begin installation, which starts from connecting directly to the antenna, connecting to all connection points, checking and decorating. The process requires adherence to several rules:

It is not recommended to bend the wires and leave them where they can be easily damaged;
the distance from electrical wiring must be at least 10 cm;
in case of deformation of the outer shell, you need to replace the damaged area or seal it with plastic, otherwise the protective screen will begin to corrode and the signal will deteriorate;
when laying in a groove with subsequent sealing, you need to place the conductor in the protective channel;
if the cable length from the receiver to the decoder exceeds 40 m, you need to install a signal amplifier;
To facilitate further maintenance, all wires must be described by attaching plastic tags to them.

Internal disguise

The best option is to hide the cables at the stage of major repairs. There are several ways here.

Conceal the wires in the wall. This technology can be used before or after wallpapering. To begin with, the paper is cut with a sharp knife, after which the edges are moved apart and fixed with needles. Next, using a puncher or manually, a groove is made for masking. After completing this work, the cable is laid in the prepared recess, and the groove is closed with alabaster or plasticine. The final stage involves applying glue to the wallpaper and fixing it in place.

How to hide wires under wallpaper is shown here:

Hide wires in the floor. There are several options here.

Conceal the wires in the floor plinth, where there is a cell for the wires. When purchasing, it is important to pay attention to the design of the product, in the central part of which there should be a special recess. It is into this that the wires are laid. This method is distinguished by its versatility and ease of execution. Hide the wiring in the groove

The principle here is the same as in the case of wall mounting

Using a hammer drill, a recess is made into which excess commutation is placed. After this, the groove is filled with cement and leveled to the floor level. Fill with cement. If the quality of the flooring in the room leaves much to be desired, you can make a new screed by hiding the wires in it. The latter must be corrugated

The principle here is the same as in the case of wall mounting. Using a hammer drill, a recess is made into which excess commutation is placed. After this, the groove is filled with cement and leveled to the floor level. Fill with cement. If the quality of the flooring in the room leaves much to be desired, you can make a new screed by hiding the wires in it. The latter should be corrugated.

https://youtube.com/watch?v=PRFIgW8aitI

Remove wiring from the ceiling. There are two options:

Hide the wires in a plasterboard niche installed around the perimeter.
Hide the wires in the gap between the tension fabric and the main ceiling. In the latter case, it is worth warning the craftsmen in advance about your decision, otherwise you will have to use other options.

Video description

How to beautifully hide wires in an apartment in the following video:

The problem of organizing wires is faced in every home. Ignoring it reduces comfort and safety, reduces the aesthetics of the interior and distracts from important matters.

A popular way to get rid of the dominance of wires is capital measures, when the wiring is hidden in the wall. It is most convenient to do this during repair work, since the process is dusty and lengthy. There are differences between installing wiring into a solid wall and drywall.

In some cases, the wire is hidden in the ceiling or floor. An alternative to technically complex methods is to use skirting boards with cable ducts or separate plastic boxes. The variety of cable channels existing on the market allows you to match them to the style of the room.

Sometimes wires are hidden in furniture; it is also possible to decorate them. It is carried out depending on the interior style of the room and the imagination of the owners.

How to hide wires from charging

Modern people often have to charge several devices at the same time. When they are all inserted into one “tee” or “multi-tailed” charging is used, with three to five cords for different devices, all elements are collected under one office clip and attached to any nearby surface. Some purchased options are separator boxes with four to six shaped holes through which only the “tails” of the charges come out.

A similar product can be easily made with your own hands by upgrading a simple shoe box covered with fabric and wrapped in colored paper.