Battery-powered wireless wall lamps - 115 photos of the best models of 2022 and features of their use

06/30/2016 master

Today you can create high-quality lighting in any room using a wide variety of lighting devices. Their assortment is so large that many are slightly confused by such diversity. Recently, in the world, an increasing emphasis in matters of indoor lighting has been placed on modern wireless models of lamps.

Trends towards simplification and increased comfort have been observed for a long time. But not everyone knows how to equip their home with modern technologies for greater comfort for a relatively small fee. Devices such as wireless lighting, especially those equipped with motion sensors, will help you get closer to the futurological dream of a smart home system. Today’s article will tell you how to organize lighting in your home using such lamps.

Range of uses

Manufacturers are now trying to place maximum emphasis on the absence of wires in almost any segment of technology. Lighting devices are no exception; supplying power to them is sometimes difficult or impossible.

Wireless wall lamps or mobile ones will be useful both as a night light and as lighting on the street or in the garage. This design will help illuminate hard-to-reach places, and will also save you in case of a sudden power outage.

Wireless lamps with a battery will help organize the decor of the room, and will also be very useful as emergency lighting.

Model Light Angel

Among wireless models, the Light Angel motion sensor lamp is very popular today. This is an LED lamp that can well illuminate an area of five meters. The light turns on for 55 seconds. This time is quite enough to overcome the dark space. If you need to spend more time in the room, the device will leave the lighting on.

The advantages of Light Angel include:

compactness;
mobility;
maneuverability. The lamp can rotate 360 degrees, and the maximum tilt is 90 degrees.

Note! The advantages listed above allow you to effectively place the lamp in any room of the house or anywhere else.

Light Angel has the following technical parameters:

motion sensor;
seven LEDs;
LED operating period is 10,000 hours;
material of manufacture: plastic;
weight - 160 g;
Installation method: three dowels and double-sided tape.

You can not install Light Angel at all, but use it as a portable flashlight. The light can also be turned on/off manually - there is a switch on the lamp. The lamp is powered by four AA batteries, which can be replaced with similar batteries. According to many evaluation criteria, such a wireless lighting device will be an excellent purchase, which will allow you to efficiently and effectively illuminate any corner of your home. In addition, Light Angel has waterproof fastenings, so it can be installed in entrances and small courtyards.

Characteristics

The main difference in such devices is the form factor and the type of flashlight itself. Various models are available from dim (as a night light) to the brightest.

It is important to pay attention to the duration of operation on a single charge. In this case, wireless battery-powered lamps are inferior to rechargeable lamps, which can be recharged without purchasing new consumables.

Options designed for mounting to a vertical plane are usually lighter in weight; based on the type of fastener, they can be designed for a bracket, but wireless lamps with Velcro are no less popular.

There are garland-like lamps on the market, in which you can switch modes, set them to constant lighting or flickering.

Of course, in addition to functional differences, the devices are varied in design. They come in a variety of designs, from the most inconspicuous to the artsy or cartoonish.

Kinds

Before starting any repair work, you need to make a wiring diagram for lighting fixtures and decide on their type.
For a complex lighting system, it will be necessary to additionally extend wires from the switchboard to the balcony. Connecting to the existing network in the apartment in an accessible distribution box is quite problematic and can be dangerous. To do this, you need to be sure of the quality of the wires and the number of cores of each cable. The most basic and economical way is to provide electricity to the balcony from the nearest outlet. In addition, modern technologies make it possible to use lamps without electricity. LED strips and some lamp models are powered by batteries and rechargeable batteries. You will only need to periodically charge or change the batteries.

But the most economical option is solar-powered lamps. This is a real discovery not only for owners of suburban areas, but also for the happy owners of sunny balconies. This unique device does not require constant care or charging on your part.

There are no restrictions on the choice of devices for a warm balcony. As a lighting device, you can choose a floor lamp, sconces, spotlights and even a small chandelier. Just like the installation location can be absolutely anything: ceiling, walls, window sill or floor.

Basic rules to follow when choosing lamps for a balcony:

The more light the better. To change the lighting level according to your desire and mood, it is better to use light power controllers.
Ceiling spotlights require more installation costs. For ordinary lamps, it is necessary to prepare a mount on the ceiling, and for hidden lamps, install a false ceiling. A direct light lamp will visually expand the space.
The vertical flow of light from wall lamps will visually lift the ceiling and expand the space. The sconce is perfect for various interior options. And a couple of lamps are enough to illuminate a small balcony.
A mobile and non-bulky floor lamp with a lampshade is the best option for solving the problems of a large family. A floor lamp can be installed near a chair for reading books or near a desk, or next to a basket of children's toys. A floor lamp with several lamps will help create a decorative effect of semi-darkness and privacy.

Do not choose lamps with colored or dark shades and lampshades.
LED strip lighting will help create unique lighting effects and add romance to the balcony interior.
On an open, unglazed balcony, you can use an outdoor garland or LED strip as lighting. Perimeter railings and window openings are the best opportunity to place bright lights.
A hanging openwork small chandelier will be the optimal solution for a miniature cozy balcony. Conversely, if you have a large loggia, using several ceiling lights can become a unique accent in the interior.
When combining a balcony with a living room, it is necessary to maintain unity of style in the interior.

Advantages and disadvantages

It’s not for nothing that the choice of many buyers falls on this type of lamps; let’s look at why they are so attractive:

How to choose a night light for the bedroom: tips and tricks
LED lamps - which are better? Review of the most popular and reliable models, with photos and videos!
How to choose a color temperature - see here! Table, instructions, overview of bright and optimal color temperature for the room

Autonomy of work is a major plus. No wires, no dependence on voltage surges;
The ease of installation is also attractive. There is no need to damage the walls and then repair them or load them with boxes for wires;
Freedom to choose your location. The device will work equally well both in a room and in a gazebo in the yard;
The motion sensor is a useful feature that allows the lights to appear where a person is present and turn off when they leave. Thus, this option is economical and convenient, because... no need to look for the switch in the dark.

Probably the only disadvantage of purchasing such a lamp is that the batteries will still have to be changed. It can fail at the most unfortunate moment if you do not control this issue by keeping a charged battery or a set of batteries in reserve.

Advantages and disadvantages

Installed device

Among all the variety of lamps at the moment, wireless models are very popular. This is due to the following advantages that can be obtained from their use:

autonomous operation - on batteries, which can be replaced with more profitable batteries;

Note! The average operating life of a wireless lighting device depends on the capacity of the battery (battery) and is approximately one year.

simple installation, which avoids such labor-intensive processes as wiring, installing additional sockets, etc. In this case, the installation is carried out cleanly, without dirt and dust, in just a couple of minutes. All you need here is double-sided tape and a couple of screws;
affordable price;
the possibility of purchasing lamps that are additionally equipped with a motion sensor;
Possibility of installation anywhere (outdoors, at home, in closets, swimming pools, etc.).

Wireless lamps are also good because they have small dimensions and weight, which allows them to be mounted on almost any surface. At the same time, they can illuminate a sufficient area with soft and diffused light.

Note! The best option would be a wireless LED lamp with a motion sensor, which consumes minimal energy and is absolutely harmless to human health.

That is why such lighting products are becoming more and more popular every year. But, despite such positive characteristics, there are still some disadvantages that you should be aware of when purchasing wireless lamps. The disadvantages here include:

Battery operated. On the one hand, the operation of battery-powered lamps is an advantage, but on the other hand, it is a disadvantage. This is due to the fact that they need to be changed periodically, and to do this you must remove the lamp to get to the battery compartment;
the use in the manufacture of such lamps of materials that are not always natural. This must be taken into account when placing devices near heated devices.

As you can see, there are only two disadvantages here and they are lost in a number of advantages that can be obtained when installed in the house or on the street.

How to choose

Choosing the best lamp for your needs from a large selection is not so difficult if you take into account some factors that the buyer often forgets about:

The area of the room that the device should illuminate. It may turn out that several devices are required due to their low power or the presence of places where light simply cannot penetrate;
Lamp function. Will it be enough to install it or will basic lighting be required;
The need for a displacement sensor. It is important here whether there are small children or animals in the apartment, as well as how active you are in this room; no one will like it if the light goes out on its own;
External or internal lighting;
Required brightness and availability of mode changes;
Battery life.

Having decided on the necessary parameters, you can go to the store.

However, having familiarized yourself with all the selection criteria, you will be able to choose your option in the online store, where you can set the selection filters according to the required parameters, and then simply choose from the suitable models purely externally, based on the photos of wireless lamps that the search offers.

What types of lamps are there without wires?

The possibilities of technology are vast. Firstly, the compactness and light weight of the receiver module allows it to be installed in a chandelier glass or under suspended ceilings - double-sided tape is used for mounting. Secondly, the latest generation light switch, combined with a dimmer (rheostat), “can” smoothly increase and decrease the brightness of the lamps. Thirdly, the signal coming from the transmitter does not interrupt other radio emissions - from a TV, computer, stereo system. But the switch can be “powered” to several lighting sources at once - a wireless lamp, wall sconces, a chandelier, spotlights or other lamps. Moreover, modern expensive models allow you to program the on and off times of specific devices.

Great prospects await the technology with the advent of “learning” actuators and those equipped with a Wi-Fi module. In the first case, the light is turned on from any remote control with an IR emitter, in the second, control of various household and electrical appliances is organized via the Internet. A few clicks on the gadget and by the time you arrive, the bathtub will be filled with water, and the sconce in the hallway will light up.

Lighting options without wiring:

control of several devices from a switch;
wide choice of protocols - radio signal, IR, Wi-Fi;
combining the circuit into a “smart home” system;
programming specific electrical appliances;
“linking” lamps and sconces to the remote control from the TV or center.

Photos of battery-powered wireless wall lights

Vertical blinds: features of the mechanism, pros and cons, photos of beautiful design
LED duralight - device, types, options and connection diagrams (130 photos + video)
How to choose an energy-saving lamp for your home - types, characteristics and application features (105 photos)

Did you like the article? Share

Technical characteristics of autonomous lighting devices

LED lamps that operate on batteries have the following technical characteristics:

dimensions of the device and its type. The dimensions of the lamp are very important; the level of illumination in the room, which is formed when installing the selected model, directly depends on them;

Hand model lamp

power. The brightness of the light flux it creates directly depends on the power of the lamp. This parameter for such lighting installations ranges from 1300 to 2300 lumens;
light flow. It reflects brightness. The more lumens the lamp produces, the more powerful and brighter the luminous flux it emits;
scattering angle. According to this parameter, the lamps can have a uniform glow and long-range;
type of light source. Various types of LEDs can be used in luminaires. They differ among themselves in the strength of the luminous flux;
type and type of batteries used. The duration of the lamp operation depends on this parameter;
class of protection against moisture and dust. For outdoors and indoor areas characterized by high humidity, only models with a high moisture resistance class (IP 54 and higher) should be used. For dry rooms, cheaper lamps with a low moisture resistance class are suitable;
operating mode. Some models may give a smooth glow, while others may flash or shine with different brightness.

As you can see, battery-powered LED lamps come in a wide variety. Here everyone can find the optimal device option for themselves.

Advantages

The main advantages of such devices:

You don't have to damage your walls by installing wiring. Imagine how much time you will save by not doing this.
Such switches can be installed anywhere in the room. You can even install such a device on a cabinet or on a mirror. Conventional switches are sometimes installed in such a way that they interfere with moving furniture when necessary.
The easy installation process of such a system is understandable even to those who have never dealt with such issues.
A wireless light control system is considered quite safe because it has no wiring. This can be especially true in homes made of wood.

Many people want to be able to turn lights on or off from different ends of the room (or from different rooms altogether). This system makes it possible to make this a reality. In this case, you will not need to run wires to each switch. Of course, you can use the remote control if you wish.
The operating radius of such devices is quite wide and is approximately 300 meters. It depends on the model you have chosen.
Wireless switches have a stylish design; such devices make the interior more interesting. Wireless lighting in an apartment allows you to decorate the interior of the room in a very beautiful, original and tasteful way, but more on that a little later.

Installation and operation

Even a child can handle installing a nano-lamp. There is no need to lay electrical wires, install sockets, or extend extension cords, as would have to be done with a regular lamp. One simple step is enough - glue the device. The light turns on with one light touch.

Nanolights attached with Velcro are perfect for those who love active recreation and tourism. In addition to being easy to use, LEDs operate for up to 100 hours continuously without changing batteries.

They are convenient to use for work in garages, basements and dark storerooms. Combining the mobile function of a flashlight, they free up your hands due to the mounting method.

How and how to illuminate a house or summer cottage

Spotlights are faithful assistants for illumination at night. They can be used with or without a motion sensor.

The motion sensor allows you to significantly save on energy costs and is increasingly popular nowadays.

When everything is in order with the lighting, then there is no need to jump up at night and look out the window while the dog barks at the road, if neighbors who have come to their dachas to rest and relax pass by on a spree.

outdoor led floodlight

What else brightens up the atmosphere of a summer evening?

Adequate light to illuminate the deck, parking lot and steps is not only functional, but also necessary to prevent injury.

Soft, defocused light near a gazebo, pool, or pond enchants, giving small areas a mysterious beauty and comfort to the home owners.

garden and park lamp

Street lighting of bridges near a pond, terrace or florarium with the help of fairy lights or a glowing ball will immerse you in the mystery of the coming night.

A variety of modern lighting fixtures, such as park lamps with halogen and LED lamps, allows you to create originality at the entrance to the site, near the gate and gate, on the paths to the house.

led park light