5 tips for choosing and calling a good electrician using the example of Moscow. Electrician services

In what cases is it worth calling an electrician to your home in Moscow?

1. If the light goes out, but the neighbors have it. And you don’t have the opportunity to check whether the traffic jams have been knocked out.
2. The light does not turn on or off randomly. Voltage fluctuations, light bulbs flickering.
3. In case of short circuit.
4. If you see that the wiring is sparking, do not hesitate to call an electrician.
5. We smelled an unpleasant smell of burning wiring.
6. Does the plug constantly break out when you turn on the kettle or microwave? Hire the services of an electrician.
7. The socket and switch do not work.
8. If more than one electrical appliance has burned out when plugged into the same outlet.
9. If the electric meter breaks down.
10. If you need to install turnkey electrical wiring in your house or install a separate socket, chandelier, switch, etc.
11. You should also contact an electrician in any other cases when there are any signs of malfunction of electrical appliances or the electrical network in the apartment.

No. 5. Work experience

When it comes to carrying out large-scale electrical installation work, the professional experience of an electrician plays a big role.
Most customers prefer to deal with a specialist who has 5-7 years of experience under his belt. However, there are quite capable, careful and responsible young specialists who are rapidly growing professionally. Sometimes such electricians perform work even better than their more experienced colleagues who do not want to develop. The area of ​​work deserves closer attention . If a specialist has worked for decades at a manufacturing plant or construction site, then some issues related to electrical work in a residential building or apartment will become too complex for him. For example, an electrician who laid wiring in a house under construction, although he will work quickly, may have difficulties in independently developing the optimal electrical wiring system, since he is used to working according to a ready-made plan. Therefore, for some specific electrical work in an office, apartment and enterprise, specialists with different training will be needed.

Which is better: a private electrician or an electrical installation company?

In this case: “how many people, so many opinions.” Some prefer to call private electricians, others turn to commercial organizations or professional teams. It is believed that calling a private trader is cheaper than calling a company. And companies, in turn, do not like to travel for small orders.

But by contacting a private owner through an advertisement, there is a risk that a fraudster or an unqualified specialist will come to you and will not give any guarantees. Therefore, many people are ready to overpay a little and contact a company that will give official guarantees and also sign an agreement with you. Let's consider the options of when to contact a private master, and when to use the services of a company.

• A private electrician is called, as a rule, for minor repairs in an apartment or private house: installation/replacement of sockets and switches; install/replace electrical wiring; hang and connect chandeliers; installation and connection of hood/air conditioner; connecting automatic gates in a country house; installation of an electric meter; assembly and installation of electrical panels; wiring layout; connection of heated floors, etc.;
• As a rule, law firms for medium or large facilities turn to the services of an electrical installation company or team to organize electrical installation work. For example, a developer hires an electrical installation company for a project to carry out turnkey electrical work (installation of electrical panels, laying cables, installation of sockets, installation of elevator equipment, etc.). Or you are a private owner, building a large house and you urgently need to organize electrical installation work in Moscow: contact the company, call a team, and specialists will do everything for you in a short time.

Conclusion: if you want to save money, then call a private trader, but no one will be responsible for the quality of the work, unless, of course, you call a specialist based on good reviews, like on our website. The “Top 10 Best Electricians in Moscow” rating was created precisely so that you can decide on a good private specialist who will come and do everything for you “without mistakes.”

Also on our website you can find a good electrical installation organization in Moscow if you need to implement a large project: read the reviews and decide on cooperation. There is no longer any need to scroll through the Internet for a long time and look through dozens and hundreds of offers!

No. 2. We pay attention to the electrician's personal tools

A good specialist always has his own professional tools at his disposal, and under no circumstances will he ask the customer for the tools necessary for the job. An electrician must have a decent number of different kinds of devices, because many jobs require specialized tools. If a “specialist” comes to you and has wire cutters, a screwdriver and electrical tape in stock, you can hardly talk about the high quality of the work performed and further safety. Moreover, a good personal tool indicates that the electrician takes a responsible approach to his work and invests money in the purchase of expensive equipment. The attitude towards the instrument also shows the level and conscientiousness of the specialist.

Popular services for calling a master electrician for electrical installation work

Detailed prices for work performed

Show in full

FAQ

How long will it take for the master to arrive in Moscow?

The average time of arrival to a client in Moscow is 40-90 minutes.

How much will electrical repair cost?

If you contact a commercial company, then, as a rule, they have a price list on their website with all the prices, and you can check the details with the operator by phone. If you do not know what specific work you require, then you will find out the exact numbers from the specialist after examining the problem.

How much do electrician services cost in Moscow: are inspections and diagnostics paid?

Electrician inspection and diagnostic services are usually FREE of charge, provided that you carry out electrical repairs or installations from them. Well, you can check the prices for electrical installation directly with the electrician himself. Some electricians provide hourly services, while others have a specific price list for services with a specific cost.

Does the technician have spare parts to repair my electrical equipment?

All technicians carry kits of parts for the most common breakdowns. If the electrician does not have the necessary parts, then he goes to the nearest warehouse or store and purchases the goods. Then he returns and performs installation.

Are there discounts for electrical work?

It all depends on the amount of work and the company (or private owner) that you contacted. If you order a service for 1000 rubles, then of course no one will give you a discount, or they will do so by inflating the price tag for the work. And if you pay, for example, 10,000-15,000 rubles, then you may well get a 10% discount.

Well, you need to understand that when ordering the service of calling an electrician from a company, and not from a private master, there is a greater chance of getting a discount, since their prices for work are higher (and they have room to lower prices), and the flow of clients is greater. Due to this, there is a chance to vary discounts. But in any case, ask about discounts if you have a “large” order, since the craftsmen themselves or company employees may keep silent about it.

How to save on electrical installations and do it efficiently, but not expensively?

Laying cables on the floor.

1. Wiring consumption is significantly less.
2. Vertical grooves up to sockets and switches are significantly less.
3. Work completion time is 2 times faster.

Cable laying in the wall without corrugation.

1. The factory wire is self-extinguishing.
2. The corrugation is used only for protection against mechanical damage when pouring the screed.
3. The corrugation is used to prevent mice from chewing the wires in the wall.
4. Corrugation consumption is significantly less.

Electrical panel.

1. It is necessary to correctly calculate the load so as not to overload the network and not install an extra machine.
2. It all depends on the customer, what degree of protection he wants in his apartment.
3. If you have an economy security degree, this does not mean that you are not protected.

How to prepare a room for electrical wiring replacement?

There are no special requirements. The only thing is that you need to move all the furniture away from the walls at least 1-1.5 meters. It is advisable to cover all furniture with film, because... Dust will be generated when the walls are chipped.

Is it possible to install an outlet in the bathroom?

Yes, you can. It is only necessary to install a residual current device (RCD) and sockets should not be placed in close proximity to water sources - faucets and other plumbing equipment.

How are materials costs calculated for electrical installations?

Usually the costs are the same. The main costs are cable products (power cable, Internet cable, TV cable, telephone cable, etc.). About 60% of the total estimate is cable products. About 30% of the costs are spent on completing the distribution board (DP), which is the heart and brain of electrical wiring. About 10% goes to fastening installation products: terminals, fasteners, brackets.

Which is better: external or internal wiring?

Wiring is installed much faster using the open method. This option is also considered more economical. But the advantage of internal electrical wiring is higher reliability and electrical safety, as well as an attractive appearance.

The external wiring option is very popular in suburban properties. But even in this case, there is a mandatory condition - hiding the wiring in corrugated pipes, which will increase fire and electrical safety when operating the electricity supply system.

Which cable is better GOST or TU?

In the CIS countries, there are two types of quality standards: GOST (state standard) and TU (technical conditions of the manufacturer). One can argue for a long time which is better: a cable made according to state standards and under the control of state certification bodies or a cable produced according to the Technical Specifications of the manufacturer. Theoretically Tech. The conditions should not be worse than GOST, but no one checks this, so WE recommend a cable made according to GOST.

How to choose a good electrician?

To find a good electrician in Moscow, spend some time studying the work that this specialist performs. Having learned all the, as they say, “ins and outs” from the inside, you will be able to ask sensible questions. A good master will definitely support a conversation with a savvy opponent, answering all questions of interest in this area.

You also need to take into account one important point - you should negotiate in advance with a competent and experienced electrician, since he is always in great demand. It should not be confused with a “jack of all trades.” You definitely don’t need such a multidisciplinary specialist. Only a professional specializing in the electrical field is able to complete the work quickly and at the highest level, but at the same time for a good price. He respects his work and will not underestimate the cost of the services provided. Such an investment will be justified - in the future the customer will not have to worry about power failures or change the electrical wiring again. Remember! A well-done job will contribute to long-term and uninterrupted operation of all energy consumers, creating comfort in the home.

You need a good electrician, we will help you find such a specialist in Moscow and the region. By collaborating with “Lider uslug”, you are working with professionals. All performers are time-tested and carry out installation and repair of electrical equipment and networks at a high level.

Safety measures when installing electrics in an apartment

Regardless of what you need to do: install electrical appliances, lay a cable, or replace all the wiring in the apartment, any work with electricity requires not only caution, but also knowledge of all the intricacies of the process. Because the future life of the owners, as well as the safety of the surrounding area, depends on each action taken. That is why you can only trust professionals here!

Specialists conduct a competent process of electrical installation work, ensuring safe and uninterrupted electrical activity. To avoid short circuits, fires or other problems associated with electrical wiring problems, craftsmen prevent all negative consequences by performing installation with extreme precision and care.

Qualified employees of our company know exactly how to select the type of wiring for any room and ensure reliable electrical protection.

Despite the number of actions (full compliance with safety precautions, preliminary inspection of the premises to identify the specifics of further work, all subsequent stages of electrical installation), ElStroy specialists will carry out all technical procedures within a strictly specified time frame.

Electrical installation in the apartment includes

• Visit of a specialist, diagnostics of the object
• Drawing up a diagram of the location and quantity of electrical appliances, sockets, switches (based on an electrical project, design project)
• Drawing up an estimate for electrical installation work
• Wall chipping, installation of socket boxes (after plastering the walls)

• Installation of all necessary power and low-current cables
• Electrical panel installation
• Checking all power lines (before finishing work)
• Finishing work
• Installation of sockets, switches, lamps, automation
• Commissioning works