In modern kitchens, hobs are increasingly being used instead of traditional stoves. They perform the same functions, but take up less space and look more aesthetically pleasing.
However, not everyone knows how to properly handle such equipment. Due to connection errors, use of unsuitable cookware, and careless handling, hob surfaces fail before the end of their service life. Read our article about when it is necessary to replace the hob and how to remove the hob surface of an electric stove.
Disabling the necessary communications of the hob for dismantling
In order to dismantle the gas panel equipment, it is necessary to carry out a number of manipulations with the gas supply shut-off valves. If gas is supplied from underground or external gas distribution networks, the ball valve at the entrance to the living space is closed.
If there is no access to the gas tap, an application is submitted to a specialized gas service to suspend the fuel supply.
When using a cylinder gas supply system (propane, butane, isobutane), you need to turn the valve to the “Closed” position. Then unscrew the gas hose from the panel to avoid the appearance of static voltage, install an equalizing jumper between the panel and the gas supply hose.
Dismantling a Bosch brand electric induction surface requires more careful adherence to safety regulations. Disconnect the panel from the power supply by removing the plug from the socket. Then use the “Network” indicator to make sure that the signal lamp is not lit, this means that the equipment is completely de-energized.
Mechanical dismantling: rules and technology
A set of necessary tools for dismantling:
- screwdriver “+”;
- pliers;
- side cutters;
- wrench 8*10;
- gas key.
Special tool for dismantling
First of all, use a screwdriver to loosen the fastening of the surface with the table top of the kitchen module. If the wire is laid permanently (for electrical panels), the terminal box is disassembled and the supply wires are disconnected. The grounding conductor from the device body is disconnected last.
Then the mounting screws are completely unscrewed and removed from the tabletop. Removal of the hob is considered complete.
Dismantling the gas cooking structure is carried out in the same way. In order to stop the supply of natural gas to the surface, it is necessary to close all fittings and visually ensure that the handles of taps and valves are in the “closed” position. Next, loosen the clamp and install the standard plug on the hose.
Correct removal of the hob
So what is the correct way to remove the hob from the countertop? In order to properly remove the gas surface, it is worth considering the entire process in detail:
- the first step is to find the centering screws that hold the entire structure;
- then the screws on the centering screws are unscrewed;
- after this you need to find the corner mounting hooks. The screws on them are unscrewed, but the main thing is not completely, they must remain in place;
- the hooks will be loosened, so the product can be easily pulled out through the hole in the tabletop;
- After the structure is removed, you can begin installing another new device. If it has not yet been selected, then it is worth choosing it correctly;
- if you have already purchased a new hob, and it does not fit the size of the hole in the table, then cut a new one using a file;
- Next, another panel is installed in place in the countertop.
Glass panels must be removed by specialists
